ASTM Thermometers 118 C&F to 137 C

All of the ASTM thermometers listed in this catalog are produced by manufacturers of outstanding quality. Strict manufacturing procedures and quality controls ensure the fabrication of thermometers which are fully in compliance with the dimensional and accuracy requirements of ASTM Specification E-1.

All thermometers are available with or without a NIST traceable, ISO/IEC 17025 and ANSI/NCSL Z540-1 accredited report of calibration.

ASTM Thermometers with NIST traceable, ISO/IEC 17025 and ANSI/NCSL Z540-1 accredited report of calibration

ASTM No. Cat No. Application Range Div Length Immersion ASTM specified test points
118C 10118C-C Kinematic viscosity @ 30 °C 28.6 to 31.4 °C 0.05° 305mm total 0, 30, 31 °C
118F 10118F-C Kinematic viscosity @ 86 °F 83.5 to 88.5 °F 0.1° 305mm total 32, 86, 88 °F
119C 10119C-C Coolant Freezing Point -38.3 to -30 °C 0.05° 305mm total -38, -30, 0 °C
119F 10119F-C Coolant Freezing Point -37 to -22 °F 0.1° 305mm total -36, -22, 32 °F
120C 10120C-C Kinematic viscosity @ 40 °C 38.6 to 41.4 °C 0.05° 305mm total 0, 40, 41 °C
121C 10121C-C Kinematic viscosity @ 100 °C 98.6 to 101.4 °C 0.05° 305mm total 0, 100, 101 °C
122C 10122C-C Brookfield Viscosity -45 to -35 °C 0.1° 300mm total -45, -40, -35 °C
123C 10123C-C Brookfield Viscosity -35 to -25 °C 0.1° 300mm total -35, -30, -25 °C
124C 10124C-C Brookfield Viscosity -25 to -15 °C 0.1° 300mm total -25, -20, -15 °C
125C 10125C-C Brookfield Viscosity -15 to -5 °C 0.1° 300mm total -15, -10, -5 °C
126C 10126C-C Kinematic viscosity @ -26.1 °C -27.4 to -24.6 °C 0.05° 305mm total -27, -26.1, 0 °C
126F 10126F-C Kinematic viscosity @ -15 °F -17.5 to -12.5 °F 0.1° 305mm total -17, -15, 32 °F
127C 10127C-C Kinematic viscosity @ -20 °C -21.4 to -18.6 °C 0.05° 305mm total -21, -20, 0 °C
128C 10128C-C Kinematic viscosity @ 0 °C -1.4 to 1.4 °C 0.05° 305mm total 0, 1 °C
128F 10128F-C Kinematic viscosity @ 32 °F 29.5 to 34.5 °F 0.1° 305mm total 32, 34 °F
129C 10129C-C Kinematic viscosity @ 93.3 °C 91.6 to 94.4 °C 0.05° 305mm total 0, 93.3, 94 °C
129F 10129F-C Kinematic viscosity @ 200 °F 197.5 to 202.5 °F 0.1° 305mm total 32, 200, 202 °F
130C 10130C-C Tank Gauging, Refill -7 to 110 °C 0.5° 305mm total 0, 35, 70, 105 °C
130F 10130F-C Tank Gauging, Refill 20 to 220 °F 305mm total 32, 100, 160, 220 °F
132C 10132C-C Kinematic viscosity @ 150 °C 148.6 to 151.4 °C 0.05° 305mm total 0, 150, 151 °C
133C 10133C-C Bending Beam Rheometer -38 to 2 °C 0.1° 379mm 76mm -36, -30, -24, -18, -12, -6, 0 °C
134C 10134C-C Sludge 144 to 156 °C 0.2° 270mm 100mm 145, 150, 155 °C
135C 10135C-C Fuel Rating Air-High 38 to 93 °C 168mm 40mm XXXXX
135F 10135F-C Fuel Rating Air-High 100 to 200 °F 168mm 40mm XXXXX
136C 10136C-C Aviation Fuel Density -20 to 60 °C 0.2° 285mm total -20, -10, 0, 10, 20, 30, 40, 50, 60 °C
136F 10136F-C Aviation Fuel Density -5 to 140 °F 0.5° 285mm total -5, 15, 32, 60, 85, 110, 135 °F
137C 10137C-C Oxidation Cell Test 80 to 100 °C 0.1° 250mm 76mm 80, 90, 100 °C

ASTM Thermometers without calibration

ASTM No. Cat No. Application Range Div Length Immersion
118C 10118C Kinematic viscosity @ 30 °C 28.6 to 31.4 °C 0.05° 305mm total
118F 10118F Kinematic viscosity @ 86 °F 83.5 to 88.5 °F 0.1° 305mm total
119C 10119C Coolant Freezing Point -38.3 to -30 °C 0.05° 305mm total
119F 10119F Coolant Freezing Point -37 to -22 °F 0.1° 305mm total
120C 10120C Kinematic viscosity @ 40 °C 38.6 to 41.4 °C 0.05° 305mm total
121C 10121C Kinematic viscosity @ 100 °C 98.6 to 101.4 °C 0.05° 305mm total
122C 10122C Brookfield Viscosity -45 to -35 °C 0.1° 300mm total
123C 10123C Brookfield Viscosity -35 to -25 °C 0.1° 300mm total
124C 10124C Brookfield Viscosity -25 to -15 °C 0.1° 300mm total
125C 10125C Brookfield Viscosity -15 to -5 °C 0.1° 300mm total
126C 10126C Kinematic viscosity @ -26.1 °C -27.4 to -24.6 °C 0.05° 305mm total
126F 10126F Kinematic viscosity @ -15 °F -17.5 to -12.5 °F 0.1° 305mm total
127C 10127C Kinematic viscosity @ -20 °C -21.4 to -18.6 °C 0.05° 305mm total
128C 10128C Kinematic viscosity @ 0 °C -1.4 to 1.4 °C 0.05° 305mm total
128F 10128F Kinematic viscosity @ 32 °F 29.5 to 34.5 °F 0.1° 305mm total
129C 10129C Kinematic viscosity @ 93.3 °C 91.6 to 94.4 °C 0.05° 305mm total
129F 10129F Kinematic viscosity @ 200 °F 197.5 to 202.5 °F 0.1° 305mm total
130C 10130C Tank Gauging, Refill -7 to 110 °C 0.5° 305mm total
130F 10130F Tank Gauging, Refill 20 to 220 °F 305mm total
132C 10132C Kinematic viscosity @ 150 °C 148.6 to 151.4 °C 0.05° 305mm total
133C 10133C Bending Beam Rheometer -38 to 2 °C 0.1° 379mm 76mm
134C 10134C Sludge 144 to 156 °C 0.2° 270mm 100mm
135C 10135C Fuel Rating Air-High 38 to 93 °C 168mm 40mm
135F 10135F Fuel Rating Air-High 100 to 200 °F 168mm 40mm
136C 10136C Aviation Fuel Density -20 to 60 °C 0.2° 285mm total
136F 10136F Aviation Fuel Density -5 to 140 °F 0.5° 285mm total
137C 10137C Oxidation Cell Test 80 to 100 °C 0.1° 250mm 76mm
s

WARNING: Mercury is considered a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the product Material Safety Data Sheet (MSDS) for details. User should be aware that selling mercury and mercury containing products into your state may be prohibited by state law.

Pin It on Pinterest

Share This