Accredited calibration services: 

From -196^oC to 1000^oC   ASTM thermometers, digital thermometers, PRTs, thermocouples, thermistors

Specific Gravity hydrometers. API hydrometers, Baume hydrometers,
Kg/M3 (density) hydrometers, Brix hydrometers, Proof hydrometers

ASTM Class 1 and OIML E-2 and lesser specification stainless steel and brass laboratory weights.  New calibrated weights and re-calibration of weights you currently have.

Thermo-hygrometers, chart recorders, humidity sensors, data-loggers

Burets, pipets, volumetric flasks, graduated cylinders, volumetric glassware

 Testing and certification that an instrument complies with specified accuracy requirements...

CANNON-UBBELOHDE VISCOMETERS

Suspended level viscometer for measurement of kinematic viscosity for transparent Newtonian liquids according to ASTM D 445 and ISO 3104.  Also used for evaluating jet and hydraulic lubricants.  Especially suited for use at temperatures above 93°C (200°F) or below -18°C (0°F).  Require no kinetic energy corrections over 0.5 to 100,000 centistokes range.  Viscometer constant is same at all temperatures.  Specifications conform to ASTM D 446 and ISO 3105. 

Provided with Cannon's ISO/IEC 17025 certificate of calibration and instruction sheet.   

■    Minimum sample volume 11 mL.  Requires liquid bath depth of 254 mm (10 inches); must be submerged to approximately 220 mm (8.5 inches). 

■    Constants and ranges are specified in Table. 

■    Holder is not supplied.  Refer to catalog # 9726-M70, M73, and M76

Need viscosity standards for checking your viscometers?  We carry Cannon^® viscosity standards!

Recalibration form and address label to send in your viscometer for calibration