|
|
|
|
Accredited calibration services:
From -196oC to 1000oC ASTM thermometers, digital thermometers, PRTs, thermocouples, thermistors
Specific Gravity
hydrometers. API hydrometers, Baume hydrometers,
ASTM Class 1 and OIML E-2 and lesser specification stainless steel and brass laboratory weights. New calibrated weights and re-calibration of weights you currently have.
Thermo-hygrometers, chart recorders, humidity sensors, data-loggers
Burets, pipets, volumetric flasks, graduated cylinders, volumetric glassware
Testing and certification that an instrument complies with specified accuracy requirements...
|
CANNON®
VACUUM
VISCOMETERS Supplied with Cannon®
Instrument
Company’s ISO/IEC 17025 Report of Calibration CANNON-MANNING
VACUUM VISCOMETERS Calibrated CMVC Series
For measurement of viscosity of highly viscous materials such
as asphalt cement at 60°C (140°F) according to ASTM D 2171.
Applicable to materials with viscosity range of 0.036 to 80,000 poise.
Vacuum of 300 mm Hg is applied to small arm with timing bulbs; two bulbs
are incorporated to extend viscosity range of viscometer. Provided with ISO/IEC 17025 certificate of calibration and
instruction sheet. ■ Minimum
sample volume 6 mL. Require liquid bath depth of 180 mm (7.1 inches) ■ For
holder, see 9726-N15
Cannon-Manning
Vacuum Calibrated CMVC-RO Series (not shown) Same as 9724-H50 series, but with permanently attached round metal holder, for hole 51 mm (2 inches) in diameter. Need viscosity standards for checking your viscometers? We carry Cannon® viscosity standards!
|
